# Issue with Terminal Freezing Up

**URL:** <https://community.droneblocks.io/t/issue-with-terminal-freezing-up/1073>\
**Category:** DroneBlocks Support\
**Created:** [September 6, 2023, 12:16am UTC](https://community.droneblocks.io/t/issue-with-terminal-freezing-up/1073 "2023-09-06T00:16:08Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![mregannt](https://avatars.discourse-cdn.com/v4/letter/m/59ef9b/32.png) [@mregannt](https://community.droneblocks.io/u/mregannt)\
**Post date:** [September 6, 2023, 12:16am UTC](https://community.droneblocks.io/t/issue-with-terminal-freezing-up/1073/1 "2023-09-06T00:16:08Z")

</div>

I started working with the walkthrough at Using Computer Vision for Object and Face Detection with Go1 and ran into an issue with the Go1 Pi terminal locking up when we got to step 3 and entered the password for the Go1 Pi.

---

<div class="post-metadata">

**Author:** ![dbaldwin](https://avatars.discourse-cdn.com/v4/letter/d/d2c977/32.png) [@dbaldwin](https://community.droneblocks.io/u/dbaldwin)\
**Post date:** [September 6, 2023, 2:59am UTC](https://community.droneblocks.io/t/issue-with-terminal-freezing-up/1073/2 "2023-09-06T02:59:31Z")

</div>

When you’re at the terminal can you run the following and do you get a response?

```auto
ping 192.168.12.1

```

That will tell us if you’re on the Go1 network and can get a response from Pi.