# Problem with tello

**URL:** <https://community.droneblocks.io/t/problem-with-tello/964>\
**Category:** Uncategorized\
**Created:** [June 4, 2023, 7:13am UTC](https://community.droneblocks.io/t/problem-with-tello/964 "2023-06-04T07:13:47Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![AlcinoKiala](https://avatars.discourse-cdn.com/v4/letter/a/a9a28c/32.png) [@AlcinoKiala](https://community.droneblocks.io/u/AlcinoKiala)\
**Post date:** [June 4, 2023, 7:13am UTC](https://community.droneblocks.io/t/problem-with-tello/964/1 "2023-06-04T07:13:47Z")

</div>

Hello everyone!  
I have a problem with my tello that I already use well and with the new one of the boost combo type! Both don’t work for me; It will be an update problem, from the fornicer or from the manufacturer, or what, I don’t know. Install the usual libraries well. Can someone tell me what’s going on?

Thank you so much

---

<div class="post-metadata">

**Author:** ![dbaldwin](https://avatars.discourse-cdn.com/v4/letter/d/d2c977/32.png) [@dbaldwin](https://community.droneblocks.io/u/dbaldwin)\
**Post date:** [June 17, 2023, 8:57pm UTC](https://community.droneblocks.io/t/problem-with-tello/964/2 "2023-06-17T20:57:19Z")

</div>

What firmware version are you using and what is the specific problem you’re running into? Does the Tello respond to the Takeoff command and ignore others?